Common problems with plumbing that can be solved without the involvement of a specialist

    0
    138

    June 30, 2022, 08:02 | Science and technology

    What you can fix in the bathroom yourself.

    Common plumbing problems that can be solve without the involvement of a specialist

    Is the toilet leaking or does the sewer smell bad? How to solve problems in the bathroom before they become bigger and more expensive, informs Ukr.Media.

    Fix a clogged drain

    Showers can look different, but they usually have a water seal to stop the smell. In any case, the drain should be cleaned regularly so that soap residue and hair do not clog it and cause even more clogging.

    Here's how to do it:

    • Remove the insert and wash it with detergent with a dish brush.
    • Then insert the insert and refill with water. If the plum is clogged below, you can use a sponge or Pipe Cleaner.

    Fix a dripping faucet

    A dripping faucet can cost a pretty penny, so try to fix the problem as soon as possible. Replacing gaskets or liners is not so difficult, the only problem for many is that there are a lot of different models on the market and it can be difficult to find the necessary spare parts.

    In addition, brands and models are assembled differently. It can be difficult to find suitable components for cheap imported faucets. Therefore, it is sometimes easier to replace the entire faucet with a new one than to waste time trying to repair the old one.

    Here's how to do it:

    Find out which faucet you have. If you don't have receipts or paperwork, visit the supplier's website and see if you can find pictures of your faucet. Big brands often have descriptions and videos showing how to replace parts yourself.

    Remove moisture

    Bathroom renovation rooms are a job for professionals. However, if there is no leakage, then try to ensure good ventilation. Do not close doors, do not leave laundry to dry and always wipe excess water from the floor.

    Clogged sink

    Clogged sink is not a problem either. In most cases, the clog is caused by a clogged siphon under the sink, which can be easily cleaned yourself.

    Here's how to do it:

    • Prepare a bucket and a few rag.
    • Unscrew the pipe sections. If the water seal is made of plastic, you usually don't even need to use tools.
    • Clean the inside of the tube.
    • Assemble the parts and check that the water is flowing through the pipes and that there are no leaks.
    • If the pipe is blocked below, it can be cleaned with a plunger or special pipe cleaners.
    • If this does not work, it is better to call a plumber.

    Leaking toilet

    This problem can also be solved by yourself. This is usually caused by limescale, which means the valve cannot close tightly.

    Here's how to do it:

    Make sure the valve is not covered with limescale. If this is the case, the lime can be dissolved with acetic acid. If this does not help, the gasket may need to be replaced.

    Modern toilets are more difficult to repair than older ones, but you can find good training videos on the Internet that will help you solve various problems without involving a specialist.

    Dirty and dark seams between tiles

    The seams between the tiles are often filled with dirt and soap residue over time. This causes black spots of mold to grow, which, while not necessarily dangerous, still look unsightly.

    Here's how to do it:

    Mold cannot grow on clean and dry seams because there is no food for the fungus to grow. Thus, to remove the fungus, you need to thoroughly wash the seams with any suitable detergent. This will kill mold and remove dark seams.

    Broken bathroom tiles

    Unfortunately, in a room with high humidity makes it difficult to replace several broken tiles without damaging others. It is also impractical to change the tiles on the floor. Another thing is a toilet without a shower, here you can replace individual plates.

    Here's how to do it:

    • First clean the seam around the damaged tile (put on protective glasses).
    • Clean the back of the old tile and glue the new one.
    • After the glue dries, fill the joints around the new tile. Note that the joints will look newer, as it is difficult to get exactly the same color as on other walls.

    LEAVE A REPLY

    Please enter your comment!
    Please enter your name here